light tester system

日期:2021-06-21 06:09
浏览次数:2750
摘要:
            light tester system
(8)Standards  
  Watt Wr fr  
  11W 10.8±1.3 W 56.1±4 KHz  
  14W 13.5±1.4 W 56.9±4 KHz  
  19W 18.9±2.2 W 53.5±4 KHz  
  22W 17.6±2.0 W 46.6±4 KHz  
   
Inspection Method:  
   
1.Connect Check wire(CH3,CH4/CH5,CH6) to pin (P3,P4/P5,P6) connected. [Load Resistor: 600 ohm]
   ( 300ohm resistor*2 [300Ω30W Cement resistor] series connection. )  
   
2.Connect Check wire(CH1,CH2)with power source of AC220V/50Hz to Lands or Wire (F1,P2).   
   
3.Measure DATA (Wr/fr) after 2 seconds from turn on.  
   
4.Turn off AC220V/50Hz, then Switch off the Load Resistor.   
   
   
<<Caution>>  
(1) You should not to pull strongly when Wr/fr is measured.  
   
(2)Since a measuring method is different compared with other types, Pls Be careful.

 

test volt, WR,FR

粤公网安备 44030602001522号

最好的中文字幕视频_中文字幕专区高清在线观看_caoprom超碰人人看_中文字幕乱老妇女视频